PVC Faced MDF

Compare the complete delivered panel: front and back references, total thickness, edging, fabrication and any required surface data. The laminated MDF range brings these facing options together.

A smooth sheet and a covered profile use different finishing sequences.

Machining a groove through an already faced flat sheet removes the decorative surface in that feature. If the design requires continuous film over a recess and edge, send the unfinished part geometry and covering route with the inquiry. Include profile depth, inside corners, radii and the reverse detail rather than treating every PVC film as a forming grade.

RENOLIT’s processing overview distinguishes flat lamination, wrapping and three-dimensional thermoforming. Select the film and bonding process for your own component. The processing reference describes material routes; your quotation should name the route and delivered item being proposed.

A faced sample helps you choose the look. An edged corner or the intended furniture part helps you review how that look carries through production.

1. Bring the referenceShare the decor, texture and sheen you want, plus the finished thickness, reverse and sample size.
2. Trial the detailUse your planned cutting, edging and hardware. For a formed part, discuss the drawing and proposed film/process before arranging the trial.
3. Retain the selected itemKeep the film and edge references, back treatment and drawing revision with the physical component sample.

Samples are free; the buyer pays courier freight. A freight credit toward a later order can be agreed. Include the delivery country and the finish or workshop checks you want the sample to support.

Use a corner or profile as the purchase reference.

For flat board stock, cut and edge a representative corner with the planned tooling and edge material. Inspect the trimmed film, joint, exposed core and hardware openings before judging the completed surface. Keep the finishing sequence with the selected reference.

For a covered profile, include the deepest recess, corner and return in the requested trial part. Review the visible film and bond around those details after the proposed process, with the reverse and completed dimensions recorded. Keep the film and adhesive references, drawing revision and observations together for the item you choose.

Use one record for the decor selection, workshop trial and purchasing handover. Add the actual panel construction and the conditions under which the sample was evaluated.

Request information for the proposed PVC facing and MDF substrate with your intended use. Keep the film, reverse, adhesive and finished thickness identifiable in the product description.

If the project specifies scratch, stain, cleaning, heat or other surface tests, send the method and required result. For a formed component, include the profile and processing conditions needed in its technical review.

Ask for destination-market documents with the actual substrate and finish named. This keeps the board data, decorative-surface information and any finished-system requirement connected to your purchase item.

Ask for the data that answers the component question.

Scroll horizontally to compare all columns.

Keep film performance, MDF emissions and completed-part fit as separate lines in the technical package. State the specific property your project needs, rather than asking for an undefined “PVC certificate.” A film data sheet and a board report identify different materials within the same furniture item.

Discuss face and corner protection, bundle separation and labels for each finish. For directional or adjoining parts, include grain arrows, set codes and the receiving sequence in the packing instructions.

Arrange dry, supported storage before fabrication, following the proposed film and panel instructions. Check decor, back treatment, dimensions and surface condition against the schedule at receiving. The incoming panel checklist provides a practical record before the boards enter your workshop.

Keep the finish sequence intact after delivery.

At receiving, match each package to the film reference, reverse, finished dimensions and item or set code. Inspect faces, corners and edges before fabrication, and record quantities or damage against the packing list. Use any protective-film removal instructions supplied for the proposed surface.

Retain the finish and corner reference for repeat purchases. Review any change to film identity, sheen, texture, core, reverse, adhesive, profile or edge before placing the next run. A visually similar replacement may change the process or the appearance of adjoining parts.

Compare your film requirement with HPL and melamine using our furniture surface comparison guide, with the profile, reverse, edge and finished reference kept together.

The right furniture finish should look good across the front, the edge and the next component beside it. Start with the surface you want your customers to see.

CUZI supplies PVC faced MDF with single-sided and double-sided options. Send your decor reference, furniture drawing or physical sample. We can work through the film, MDF substrate, reverse and edge detail with you, then arrange a faced sample before your container order.

PVC faced MDF uses a decorative PVC film applied to the MDF substrate. The European Panel Federation describes MDF as a substrate for PVC foils. Identify the actual film and complete board construction when selecting a furniture surface.

For a glossy decorative component, use the high gloss MDF finish brief to describe the physical master, sheen and viewing conditions. Confirm the proposed surface system and edge alongside the PVC construction.

If the specification names PET, use the PET laminated MDF route with the selected film, finish and complete construction. Keep film identity explicit when comparing visually similar furniture fronts.

Your purchasing brief should carry the finish all the way to the assembled furniture: the selected film, the visible corner, the reverse and the neighbouring front. Order those details as one defined item. A decorative sheet for your workshop and a completed film-covered door carry different materials, operations and delivery expectations.

For kitchen locations or other demanding interiors, describe heat sources, moisture exposure and cleaning needs. Include the film, core, adhesive, exposed edges and fittings when reviewing the component’s intended use.

Specify the finish where separate parts meet.

Place a door, drawer front and edge reference together in the lighting planned for the furniture. Compare colour, texture and sheen from the viewing positions the customer will use. Mark grain arrows and any sequence requirement on the adjoining parts, including the side panel at the end of the run.

For kitchen or utility furniture, identify the nearby heat source, likely splash or steam exposure, cleaning products and ventilation. Include exposed edges, hinge pockets and openings in the finished-part specification. Request the chosen film and bonding system’s service and cleaning instructions, together with the substrate information for those conditions.

Visible finish

One selected PVC decor reference, texture and sheen, with the intended grain direction marked on each front.

Board and reverse

Finished thickness, MDF designation and core thickness, plus the chosen single/double-sided arrangement and back reference.

Component detail

Flat edged sheet or a requested formed profile, with corner, hinge and joint details shown on the drawing.

Purchase schedule

Fronts grouped by furniture set, with quantities, finish references, sample identity and drawing revision.

Arrange neighbouring fronts under the lighting planned for the room. Review the face-to-edge joint and the complete part fit before carrying that reference into the production order.

Convert furniture sets into a clear component quantity.

For a planned run of 120 furniture sets, each with two 450 × 720 mm rectangular door blanks and four 450 × 180 mm drawer-front blanks, the schedule below calculates the part quantities and net blank area. It excludes cutting gaps, edge trim, machining allowances, defects and a production reserve.

Scroll horizontally to compare all columns.

These figures describe blank demand, rather than the sheet order. Send the complete list with requested sheet dimensions, direction restrictions and the allowances required by your process. The cutting plan and proposed formats will determine purchased sheets and usable component cost.

If the listed sizes are completed wrapped or edged dimensions, prepare the actual core or blank sizes from the drawing before nesting. Group adjoining pieces by set and mark any pattern sequence that prevents independent rotation. Carry those groups into pack labels so the workshop can assemble the finish you selected.

Order from a one-container minimum, with mixed loads available. List the PVC decors, finished thicknesses, formats and reverse arrangements by item; combine them with other MDF or plywood products in the purchase schedule.

Regular production takes 10–15 days, with shipping time additional. Share the selected surface, sample requirements and destination when discussing the production plan. We quote FOB or CIF with the named port and itemised order.

Use the mixed-panel order schedule to keep your finishes and quantities clear. Wholesale MDF purchasing helps organise the broader stock or workshop mix.

Compare the film-covered item, not an ambiguous finish name.

Use the same film reference, core, reverse, completed thickness and dimensions across quotations. Record whether each offer covers flat sheets, cut blanks, profiled parts or completed components. List included cutting, covering, edging and packing alongside the price unit and item quantity.

Compare delivered material and remaining workshop operations per usable component. Keep the selected face, back, edge and drawing on one item code, with each matching set identifiable. Name the same FOB or CIF port and required receiving date when comparing delivery scope.

Start with a surface reference and the board sizes you have in mind. Add quantities and a destination, and we’ll work through the PVC panel options with you.

Product: PVC faced MDF for [furniture / interior component].
Panel format: [width × length in mm; sheet stock or component dimensions].
Finished thickness: [total panel thickness and tolerance].
PVC film: [reference and thickness; decor, texture, sheen and grain direction].
MDF core: [board grade and core thickness; emission class and test method].
Faces and back: [single-sided / double-sided; reverse finish and layer reference].
Component: [flat edged panel / requested formed profile; drawing revision and process].
Edge and hardware: [band or forming detail; exposed edges, joints and fittings].
Quantity: [sheets / parts per complete item; other mixed-load panels].
Processing sequence: [when the core is machined, covered, trimmed and edged; delivered scope].
Finish sets: [adjoining parts, direction arrows, sequence and set codes].
Sample and documents: [finish / component trial; required surface and board information].
Quotation: FOB or CIF [named port]; [receiving date and packing references].