On this page
Order MDF slatwall panels around the display fittings they need to carry. Bring the panel finish, routed slot and matching aluminum insert into one specification, then check the complete detail before production.
CUZI supplies melamine-faced MDF, machining and matching channels for drawing-based orders. Our October 2026 slotted MDF inspection shows 980 white and brown panels with 6,000 channels and an assembly-fit check. Use that supplied construction as a starting point for your own panel and fitting schedule.
Choose the board, slot and display fitting together
A slatwall order needs more than a colour and sheet size. The slot opening, internal profile and remaining MDF section determine how the insert fits. Hook and bracket geometry, wall fixing and the intended load complete the installation brief.
Scroll horizontally to compare all columns.
| Part of the order | Specify | Check on the sample |
|---|---|---|
| MDF substrate | Board grade, finished thickness, emission requirement and final panel size. | Actual thickness and the MDF section left behind the routed slot. |
| Decorative face | Melamine colour, texture, reverse finish and exposed-edge treatment. | Colour match, slot-edge appearance and finish at a panel joint. |
| Slot pattern | Dimensioned cross-section, centre spacing, direction, number of slots and edge margins. | Slot width and depth, alignment and the fit of adjoining panels. |
| Aluminum insert | Profile drawing or physical reference, length, finish and quantity. | Insertion, retention and fit with the intended hook or bracket. |
| Assembly scope | Channels fitted into panels or supplied separately; end details and included hardware. | The delivered condition and the work left for the installer. |
| Mounting and loads | Wall/support arrangement, fasteners, fitting positions and required working loads. | Validation of the complete installation against the project requirements. |
Choose the surface on the Melamine MDF page. Use MDF machining for other routed profiles, holes or perforations. Acoustic slotted panels have a different purpose; use the acoustic panel route for an absorption requirement.
A supplied panel-and-channel construction
The HQC inspection dated 22 October 2026 records 750 white and 230 brown melamine slotted MDF panels, nominally 8′ × 4′ × 17 mm, with 6,000 aluminum channels. The 8-piece assembly test passed. Those dimensions describe the inspected order; your drawing sets the panel size and slot pattern for a new order.
See the slot section, channel profile and assembly photographs. The recorded result checks assembly fit. It does not give a load rating for a completed slatwall installation.
Check a working detail before ordering the full set
- Send the panel drawing and a channel or fitting reference with the intended orientation.
- Check a finished sample for slot geometry, channel fit and the actual display fitting.
- Trial adjoining panel edges and the proposed mounting detail. Arrange the load validation required for the installation.
- Keep the accepted drawing revision, decor and sample reference against the order item.
For repeat purchases, retain the same insert profile and fitting reference as well as the panel drawing. A new hook, channel or mounting system requires a new fit review. The repeat-order guide explains how to keep changes identifiable across purchases.
Keep panel and channel quantities on separate lines
State panels by colour and drawing, and channels by profile and length. Calculate channels from the actual slot layout and supplied assembly scope. Do not use the ratio from a previous shipment as a standard fitting allowance.
Include spare channels, end details and packaging for separately supplied profiles in the schedule. Label the packs by panel item and matching channel item, then check the packing list against both quantities before shipment.
CUZI’s minimum order is one container, with mixed panel loads available. Production is 7–15 days; sea transport is additional. Quotations use FOB Qingdao / Lianyungang, with destination-port freight quoted separately. The quotation identifies the board, machining, channels and packing included. Delivery terms and the 180-day warranty and order-specific returns accompany the order.
Slatwall MDF buying questions
Can CUZI supply melamine MDF slatwall panels and aluminum inserts together?
Yes. Send the panel drawing, decor, slot section and matching insert profile. CUZI has supplied melamine slotted panels with aluminum channels, including the white and brown order shown in the inspection case.
How do slatwall panels differ from other slotted MDF?
Slatwall panels are specified around a display-fitting assembly. The purchase defines the display-fitting profile, panel orientation, mounting and required load. Acoustic slots or decorative grooves are different constructions.
What panel thickness and slot spacing should I order?
Specify both on the panel drawing around the selected assembly. The inspected order used nominal 17 mm boards; it does not establish a universal thickness or slot spacing for other orders.
How is a slatwall load rating established?
The board, routed section, insert, display fitting and wall fixing work together. Validate the required load on the complete specified installation. The published inspection demonstrates assembly fit, not a load rating.
Can I order white and woodgrain panels in one shipment?
Yes. List each decor and drawing separately with its quantity, reverse finish and corresponding channels. Confirm the appearance with a physical sample before production.
